12
NOTE:
- If you need to re-assign the sensor channel, slide the channel slide switch to the new
channel position. For the new channel number to be effective, press [ RESET ] key on the
sensor.
- Avoid placing the sensors in direct sunlight, rain or snow.
- To avoid the sensor/s and console pairing failure during new console setup, please
power up the sensor/s first, and then press [ RESET ] key on the main unit (no need on
sensors).
PLACING THE WIRELESS INDOOR SENSOR
Place a screw on the wall that you wish to hang the sensor
on. Hang the sensor onto the screw by the wall mounting
holder. You can also place the sensor on a table by itself.
SETUP THE CONSOLE
POWER UP THE CONSOLE
1. Plug the adapter provided to the power jack at the back of the console.
2. Once the console is turned on, all the segments of the LCD will be shown momentarily.
3.
The console will automatically enters sensor synchronization mode and AP mode
(refer to
SETUP WI-FI CONNECTION
).
NOTE:
If no display appears on the LCD after you plug the adaptor, press
[ RESET ]
key by using a
pointed object.
SYNCHRONIZING WIRELESS 7-IN-1 SENSOR AND INDOOR SENSOR(S)
Immediately after power up, while still in Synchronization mode, the 7-in-1 sensor and
Indoor Sensor can be paired to the console automatically. Once your sensors are paired
up, the sensors' signal strength indicator and weather reading will appear on your
console display.
BACKUP BATTERY
Backup batteries are used to keep time-sensitive information on the console’s memory
during power failure. These include:
- Time & Date, Alarm Time, Max/Min & Past 24 hours weather records, Alert setting
values, Sensor(s) channel history, and Units
1. Remove the battery door of the console.
2. Insert 3 new AAA batteries as per the polarity
indicated,
3. Replace the battery door.
BUILT-IN MEMORY
The console has built-in FLASH memory that holds the vital settings. These include:
- Time Zone, DST status, Time SYNC status, WI-FI and Weather server setting, Latitude /
Longitude, Hemisphere setting, Calibration values, and Sensor ID of paired sensor(s)
Summary of Contents for 7802541
Page 74: ......
