BRERA CLASSICO CHRONO, Manual

Page: 31 / 52

Pusher A
Pusher B
2
1
3
4
A B C
31
1. Chrono Minute Hand
2. Chrono Second Hand
3. Date Window
4. Second Hand
A. Crown*
B. Date
C. Time
ISABELLA
CHRONO
SETTING THE TIME:
• Gently pull the crown out to the 2nd click — position (C).
• Turn the crown until the desired time appears.
• Gently push crown in.
SETTING THE DATE**:
• Gently pull the crown out to the 1st click — position (B).
• Turn the crown in a counter-clockwise direction until the desired date appears.
• After the date has been set, push the crown back to the normal — position (A).
**If the time is set between the hours of 9 p.m. and 1 a.m., the date may not change on the following day.
USING THE CHRONOGRAPH:
• The chronograph is able to measure and display time in 1/1 second up to maximum of 59 min. 59 sec.
MEASURING TIME WITH THE CHRONOGRAPH:
• The chronograph can be started and stopped each time pusher (A) is pressed. Pressing pusher (B) resets the chronograph
and all the hands return to their zero positions.
RESETTING THE CHRONO TO ‘12’ POSITION:
• If watch has screw down crown, unscrew. Pull crown out to position (C). Press top pusher (A) and realign chrono hand
manually to ‘12’ position. Push and rescrew crown. To test, press top pusher (A) for 5 seconds and push again to stop.
Press bottom pusher (B). Chrono should reset to ‘12’.
*CROWN: Your watch may or may not have a
screw down crown. If it does, the crown must
be unscrewed counter clockwise first before
utilizing the different settings. If your watch
does not have a screw down crown, it will
spin loosely when turned. This is NOT a defect.