Solar Energy Set SES P4033
GB
REAR
USB output socket
Can be used to charge electronic devices that get power
from USB port like MP3 player, mobile phone etc. (5 V DC,
500 mA)
Indication sign
Green lighted “POWER”: Power switch “ON”, inverter stand-
by
Green unlighted “POWER”: Power switch “OFF”
Red lighted “FAULT”: malfunction of Power inverter
Frequently asked questions
Question:
What type of batteries can be used with the kit?
Answer:
Any 12 V/ 33 Ah battery that is used for cars, boats, mo-
tor cycles, etc.
Question:
Will the solar panels over-charge my battery?
Answer:
The charge regulator ensures that a steady charge is
supplied to the battery and will not be over-charged.
Question:
Can I extend/lengthen the battery lead?
Answer:
If the lead is extended this can result in a loss of voltage
and insuf
fi
cient power transferred from the solar panels to charge
the battery.
Question:
How do I clean the solar panels?
Answer:
Dust & dirt should
fi
rst be swept off the panel surface
using a soft brush then using a wet cloth to wipe the panel surface
to remove remaining dirt & grime. It is recommended that any bird
droppings be removed as soon as possible as if left can cause
damage to the surface.
Question:
Is the solar panel kit water proof?
Answer:
It is recommended that the kit is not exposed to exces-
sive water as all components apart from the solar panel are not
water proof.
Maintenance
●
Very little maintenance is required to keep the inverter and
charge regulator operating properly. Clean the housing periodi-
cally with a damp cloth to prevent accumulation of dust and
dirt.
●
The surface of the solar panel should be kept clean by periodi-
cally wiping it with a soft cloth to ensure best performance.
●
During long-term storage without being charged, the battery
must be completely recharged every 4-6 months in order to
preserve complete and proper performance.
Technical Data
SOLAR PANEL
Cell type:
Mono-Crystalline
Output power Pmax:
40 Wp (2x 20 Wp)
Upm:
17.2 V
Dimension:
(592 x 641 x 25) mm open
(296 x 641 x 50) mm folded
SOLAR CHARGE REGULATOR
Max. solar input current:
10 A
Max. load current:
10 A
Over-discharge protection: 11 ± 0.3 V
Over-charge protection:
14.0 – 14.5 V
USB output socket
5 V DC, 500 mA
Ambient humidity:
≤
80%
Operating temperature:
-10°C up to +42°C
Fuse:
10 A
POWER INVERTER
Output Power (Continuous Watts): 150 W
Output Power (Peak):
300 W
Standby Current:
≤
0.21 A
Nominal Input Voltage (DC):
12 V
Nominal Output Voltage (AC):
230 V AC, 50 Hz
Frequency:
50 Hz
USB Output Socket:
5 V DC, 500 mA
Output Waveform:
Modi
fi
ed Sine Wave
Security
Low Battery Voltage Alarm:
10.5 ± 0.5 V
Low Battery Voltage Shutdown: 10.0 ± 0.5 V
Thermal Protect:
65°C ± 0.5°C
Overload:
Shut Down & Alarm
(Output Short Circuit Pro-
tection)
Fuse:
20 A
BATTERY (not included)
Recommended:
12 V/ 33 Ah; seal lead
acid, deep cycle, long life
(art. no. 1292990)
Note: Power & Current outputs are calculated at maximum and
will vary depending on operating conditions, environments, battery
condition, etc.
Disposal
Dispose of electronic devices in an eco-friendly fashion!
Electronic devices do not belong in your household waste. Com-
pliant with European Guideline 2002/96/EG for electric and elec-
tronic devices, used electronic devices must be collected sepa-
rately and taken in for environmentally sound recycling. Options
for disposing of used devices may be obtained from your town-
ship, city or municipal government.
Incorrect disposal of batteries and rechargeable batteries
can harm the environment! Batteries and rechargeable batteries
do not belong in the household waste. They can contain poison-
ous heavy metals and are subject to treatment as hazardous
wastes. Take your used batteries to a municipal collection site.
Manufacturer
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 • 72074 Tübingen • Germany
H. Brennenstuhl S.A.S. • F-67460 Souffelweyersheim
lectra-t • Blegistrasse 13 • CH-6340 Baar
For further information please see the Service/FAQ section of our
website www.brennenstuhl.com
