Architectural Series Faceplates:
TPS-FPAR5000L
Description
Architectural Series Faceplates bring a clean, updated look to the TPS-5000L series touchpanels.
They feature machined aluminum construction with a stylish shape that is a pleasing alternative
to traditional flat faceplates, and they are available in a variety of finishes including stainless steel,
anodized black, and the standard white and almond. (Refer to the table below.)
Use the following procedure to install the new faceplates. (Refer to the illustration below.)
1. Lift the existing faceplate off the
touchpanel.
2. Mate the four guide pins of the new
faceplate with the holes in the mounting
surface and firmly press the faceplate
over the touchpanel.
CAUTION:
Do not put pressure on the
touchscreen when removing/installing
faceplates.
MODEL NUMBER
FINISH*
TPS-FPAR-5000L-A Almond
TPS-FPAR-5000L-A/BLK
Anodized Black
TPS-FPAR-5000L-S/STEEL Stainless
Steel
TPS-FPAR-5000L-W
White
*Aluminum composition; may not be suitable for
sterile environment.
11.05 in
(28.06 cm)
13.44 in
(34.13 cm)
0.37 in
(0.93 cm)
TOUCHPANEL
GUIDE PIN
GUIDE PIN
1.11 in
(2.82 cm)
CRESTRON
Further Inquiries
If you cannot locate specific information or have questions after reviewing this guide, please take
advantage of Crestron's award winning customer service team by calling the Crestron corporate
headquarters at 1-888-CRESTRON [1-888-273-7876]. For assistance in your local time zone,
refer to the Crestron website (
) for a listing of Crestron worldwide offices.
You can also log onto the online help section of the Crestron website to ask questions about
Crestron products. First-time users will need to establish a user account to fully benefit from all
available features.
Crestron Electronics, Inc.
Data Sheet – DOC. 6327
15 Volvo Drive
Architectural Series Faceplates: TPS-FPAR5000L
Rockleigh, NJ 07647
03.05
Tel: 888.CRESTRON
Specifications subject to change without notice.
Fax: 201.767.7576
www.crestron.com
