brennenstuhl MB 110, Assembly, Operating And Safety Instructions

Page: 13 / 48

12 GB
Introduction
The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Make sure that the workbench is stable
and cannot tip.
Observe caution and safety notes!
Only use the product on firm, level
surfaces.
Danger of loss of life and accident to
infants and children!
Never use the trestle on slopes
Never use the workbench as a ladder
or as anything else.
Be sure the legs are folded apart all the
way and the leg locks are secured in
place when using the trestle.
Do not use the trestle as a scaffold trestle.
Make sure that the subsurface is not
damp or oily.
Make sure that you never exceed the
maximum permissible load of 110 kg.
Secure the working surface so that it
cannot slip.
Do not load the workpiece unevenly, e.g.
on one side only.
Checking the locking or adjustments.
Discontinue using the trestle if damaged.
Steel trestle MB 110
Introduction
Before using the product for the first time,
take time to familiarise yourself with the
product first. Read the following operating
instructions and safety instructions carefully. Please
keep these instructions in a safe place. If you hand
this product on to a third party, you must also pass
on all documents relating to the product. Only use
the product as described and for the designated
areas of application.
Intended Use
This workbench is intended for use as a trestle table
for DIY enthusiasts and hobbyist. Do not climb on
the workbench or the work surface. Any use other
than previously mentioned or any product modifica-
tion is prohibited and can lead to injuries and / or
product damage. The manufacturer is not liable for
any damages caused by any use other than for the
intended purpose. The product is not intended for
commercial use.
Scope of Delivery
1 x steel trestle
1 x operating instructions
0489412_Stahl-Arbeitsbock_Content_EU.indd 12 07.09.17 14:00