EN
17
Wireless door / window contact 868.3 MHz
Wireless door / window contact 868.3 MHz
If the door / window contact is opened, the actuator will be switched on.
If the door/window contact is closed, the actuator will be switched off.
Note:
If you reset to the default settings the wireless switch adapter
and flush-mounted actuator will be deleted from the Gateway.
Removing a direct connection
To remove the pairing between the wireless door / window contact
and wireless switch adapter or flush-mounted actuator, reset the
paired device to the default settings (see instructions for use of the
paired device).
Note:
If you reset to the default settings the wireless switch adapter
and flush-mounted actuator will be deleted from the Gateway.
Pairing the wireless door / window contact
with the BrematicPRO Gateway
When linked with the Home Automation Systems BrematicPRO via
the BrematicPRO Gateway, you can use the app/BrematicPRO PC
software to use additional software-based functions, e.g. switching
and controlling other components or to be informed on the status of
the wireless door / window contact.
The app or BrematicPRO PC software is installed and open.
The BrematicPRO Gateway is ready for use.
Keep the device at least 50 cm from the Gateway.
Open the “Settings“ menu.
Select the room where you wish to use the device.
Note:
If no rooms have been added, use the + button to add
and name a room, e.g. “Living Room“.
Select “Add Device“.
Select the frequency “868 MHz“.
Under “New Device“, select “Sensor / Detector“ and click “Continue“
to confirm your selection.
Follow the on-screen instructions.
Press and hold the pair button on the device for 3 seconds.
Enter a device name, e.g. “Living Room Window“.
Select “Add“ to assign the device to the room.
Select “Display status“ if the device should be displayed as a tile
in the app.
In this submenu you can also add the device to your favourites.
First tap “Back“ to leave the room, then “Done“ to complete the
pairing process.
The wireless door/window contact is now connected to the Home
Automation Systems BrematicPRO.
Check that the wireless door/window contact works perfectly
by opening and closing it.
For more information about the app and how to use it, please visit
the homepage at: www.brematic.com/gb/service
Cleaning the device
Clean the device with a dry, lint-free cloth. For tough dirt, you
may also slightly dampen the cloth.
Do not clean with solvent-based cleaners. These could damage
the device surface and markings.
Never immerse the device in water or other liquids. The device
may otherwise be damaged.
