Breitling EXOSPACE B55, Manual

Page: 16 / 42

29 28
• Set the minute hand, and then the hour hand, and confirm by pressing P1.
• Press the crown back to neutral position 1.
b)
TILT
(
oN
or
oFF
)
• Select the
SETTING
function by turning the crown.
• Pull the crown into position 2 (the hour and minute hands will “park”).
• Select
TILT
by turning the crown.
• Press P1 to activate the setting.
• Turn the crown to select
oN
or
oFF
(the default setting is
oFF
).
• Confirm the setting by pressing P1 and/or pressing the crown back to neutral
position 1.
N.B.: On the lower screen, a counter indicates the number of tilts activated since
the last battery charge.
c)
LIGHT
(
SHoRT
,
MEDIUM
or
LoNG
)
• Select the
SETTING
function by turning the crown.
• Pull the crown into position 2 (the hour and minute hands will “park”).
• Select
LIGHT
by turning the crown.
8.
MoDE
: option of disabling the following functions:
CHRFLGT
,
CDCUCLK
and
ALCU
.
9.
CoNNECT
: activation and deactivation of the BLE (Bluetooth ® Low Energy)
connection.
Please note that as soon as the
SETTING
mode is activated by pulling the crown into
position 2, the hour and minute hands “park” in order to facilitate the readability
of the two screens.
a)
SyNCHRo
The time shown on the analog display (hands) and that shown on the digital
display (screens) must be perfectly synchronized. In the event of the two displays
being completely out of synchronization (following a shock or accidental stop), the
analog display on the digital indicator is adjusted as follows:
• Select the
SETTING
function by turning the crown.
• Pull the crown into position 2 (the hour and minute hands will “park”).
• Select
SyNCHRo
by turning the crown.
• Press P1 to activate the setting: the hands will align themselves on the digital
display on the lower screen.
• If there is an inconsistency, turn the crown to position the seconds hand at 12
o’clock and confirm by pressing P2.