Breguet CLASSIQUE 3355, Instructions For Use Manual

Page: 5 / 16

6
3355/3357/3358
“C
LASSIQUE
”
WATCH
,
TOURBILLON
,
MANUALLY WOUND
,
WATER
-
RESISTANT TO
30
M
The crown has two positions:
1. Neutral position
(manual winding)
2. Time-setting position
Starting the watch
Crown in position 1 . This position
allows you to wind the movement. To
start the watch, wind it fully by turn-
ing the crown upwards (
▲ ▲
) until
resistance is felt. ON NO ACCOUNT
FORCE THE CROWN. When the resis-
tance is felt at the end of winding, it is
important to turn the crown down-
wards (
▼ ▼
) (at least 1 /
4
turn) in order
to release the crown wheel.Thereafter,
wind the watch daily, preferably at a
regular time.
Setting the time
Pull the crown out to position 2 . Then
turn the crown upwards (
▲ ▲
) to move
the hands forwards to the desired
time. For accurate time-setting, ensure
that the last operation was done in a
clockwise direction. Then push the
crown back to position
1 . After this
operation, rotate the crown down-
wards (
▼ ▼
) to make sure it turns
freely.