Volledige bedieningshandleiding 2
© Bredenoord 2017
8
5
Connection of the ESaver
This chapter describes how the power cables have to be connected.
5.1
Electrical connections
When using a genset with the ESaver it should be attempted to connect the installation according to the TN
system. For more information about earthing please consult the national applicable standards and regulations.
Below a schematic of a TN system is shown.
In the schematic is shown that the neutral and earth connection of the generator are directly earthed. When no
earthing is available this is done by placing an earth pin.
The connection of the ESaver should be done by a certified installation company.
Only connect the ESaver when it´s switched safely.
The ESaver provides electricity with a clockwise rotation field by means of 3 phase connection: L1, L2, L3 and
N. Connect the load(s) according to EN-50110 and keep the following points in mind during connection:
·
Only connect approved cables to the ESaver.
·
Only attach cables via the cable input. The door should be closed during operation.
5.2
Connecting power cables
The ESaver works only with a clockwise rotation field!
