21
Chapter 4: Installing Top/Bottom Bunks.
Begin by laying out the rail
parts for the Top Bunk in
front of the Bed Cabinet
wall unit. Parts are named
with the orientation as
viewed from the front.
Tighten all connecting cam
fittings. Panels must attach
exactly as shown in the
illustration.
STEP 2
FIG. 4E
Tip the bunk unit (from previous
step) on the back edge and insert
the Substrate A and B panels as
shown in the figure to the right.
FIG. 4F
STEP 3
All substrate panels must install in the direction as
shown. Cam fittings on these pieces MUST face
down on these pieces once installation is finished.