3
Fuel Burn Rate* (lowest setting)
1 Lb/Hr
Burn Time (lowest setting)
60 Hrs
Hopper Capacity
60 lbs. ( 27kg)
HEATING SPECIFICATIONS
Height
29
Width
31
Depth
29
Weight
360
DIMENSIONS
Electrical Rating
120Volt, 60Hz, 8Amp
Watts
96
ELECTRICAL SPECIFICATIONS
FUEL CONSIDERATIONS
Your pellet stove is designed to burn premium hardwood pellets that comply with Association of Pellet Fuel Industries standards.
(Minimum of 40 lbs density per cubic ft, 1/4” to 5/16” diameter, length no greater than 1.5”, not less than 8,200 BTU/lb, moisture
under 8% by weight, ash under 1% by weight, and salt under 300 parts per million). Pellets that are soft, contain excessive amounts
of loose sawdust, have been, or are wet will result in reduced performance and excessive cleaning requirements of your appliance
and
fl
ue.
Store your pellets in a dry place. DO NOT store the fuel within the installation clearances of the unit or within the space required
for refueling and ash removal. Doing so could result in a house
fi
re.
Do not over
fi
re or use volatile fuels or combustibles, Doing so may cause personal and property damage hazards.
* Pellet size may effect the actual rate of fuel feed and burn times. Fuel feed rates may vary by as much as 20%. Use PFI listed fuel for best results.
SPECIFICATIONS
CONGRATULATIONS!
You’ve purchased a heater from North America’s oldest manufacturer of wood burning products.
By heating with wood you’re helping to CONSERVE ENERGY!
Wood is our only Renewable Energy Resource. Please do your part to preserve our wood
supply. Plant at least one tree each year. Future generations will thank you.
