Breckwell ECO-AIRE SP8000, Owner'S Operation And Instruction Manual

Page: 5 / 20

Ussc 5
FUEL CONSIDERATIONS
Your Pellet heater is designed to burn certified
Premium Hardwood pellets that comply with
Association of Pellet Fuel Industries standards. Pellets
that are soft, contain excessive amounts of loose
sawdust, have been, or are wet, will result in reduced
performance. Failure to use proper fuel can affect
the longevity of the appliance. Smaller pellets could
affect feed rates. Store your pellets in a dry area and
well away from the heater.
24
⅞
[632]
12
⅜
[314] 12
½
[318]
13
¾
[349]
5
½
[140]
4 [102]
21
⅜
[543]
22
⅞
[581]
22
½
[572]
Heating Specifications
Height 21 ⅜ in. [543mm]
Width 22 ½ in. [572mm]
Depth 27
⅛
in. [689mm]
Weight 126
½
lbs. [57.5kg]
Dimensions
1
BTU output will vary depending on the quality of fuel. Use
PFI listed fuels for the best results.
2
Heating capacity will vary depending on floor plan
layout of your home, degree of insulation, and the outside
temperature.
3
Pellet size may effect the actual rate of fuel feed and burn
times. Fuel feed rates may vary by as much as 20%. Use PFI
listed fuel for best results.
Electrical Rating 110-120 volts, 60 HZ, 3.0 Amps
Watts (operational) 175 (approx.)
Watts (igniter running) 425 (approx.)
Electrical Specifications
Minimum Cut-out / Window Opening
inches [milimeters] 14” x 22 ¾ ”
[356 x 578]
Window / Cut-Out Dimensions
Specifications
Heat Output 1 16,400 BTU/hr.
Heating Capacity
2
500 - 1,000 sq. ft.
Fuel Burn Rate
3
¾ - 2 ½ lbs./hr.
Burn Time (lowest setting) approx. 35-40 hrs.
Hopper Capacity approx. 30 lbs.
Pellet Fuel Institute (PFI) Premium Standards
Min. Density 40 lbs. per cubic ft.
Size
¼
” to
5
/
16
” diameter, length no greater than 1
½
”
Heat Output 8,200 BTU/lb
Moisture Content 8% by weight or less
Ash Content
1% by weight
Salt Content 300 parts per million or less
SAFETY AND COMPLIANCE
Your Pellet heater has been safety tested and listed to ASTM E 1509-04 and ULC S627-00, by Intertek Testing
Services in Portland, Oregon, USA.