Brecknell HS-250, User Instructions

Page: 6 / 30

6 HS-250 Medical Scale User Instructions
1.2 Installation
Make sure that it is placed securely on a flat and level surface.
Follow the instructions in this manual.
Keep the operating instructions and the declaration of conformity in a safe place.
Do not drop the scale or subject it to violent shocks.
When using the scale with AC power, ensure that the supply cable is routed in such a
way as to exclude any type of tripping hazard.
Use only the type of battery stated.
Have repairs carried out only by authorized persons.
1.3 Electrical installation
1.3.1 Pluggable equipment
Pluggable equipment must be installed near an easily accessible socket outlet.
WARNING: Disconnect all power to this unit before installing, cleaning, or
servicing. Failure to do so could result in bodily harm or damage the unit.
CAUTION: The power cable must be connected to an earth-grounded electrical
outlet. The electrical supply must have a circuit breaker with an appropriate
rating to protect from over-current conditions.
For your protection, all electrical (110V or 230V) equipment used out of doors or
in wet or damp conditions should be supplied from a correctly fused power
source and protected by an approved ground fault protection device (RCD,
GFCI etc.)
IF IN DOUBT SEEK ADVICE FROM A QUALIFIED ELECTRICIAN.