AWT35-501815 Issue AB C3236_u_en_501815.docx
Page 9
2.5.2. Operation Keys
Keys are shown below along with their functions. Some keys have secondary functions.
- Press the
UNITS
key to scroll through the active units of measure.
-
In Menu mode
: It aborts a numeric entry and acts as an ESCAPE key for menu
navigation (
ESC
).
Press and hold the
OFF
key to turn off the scale.
oFF
will be displayed for 2 seconds.
- Press the
ON
key to turn on the scale. The scale will self-adjust to
0
.
- Press this key to
Zero
the display.
- Press this key to
Tare
the weight on the scale up to 100% of capacity.
-
In Menu mode
: It accepts the displayed item/value in the menu structure or during
numeric entry (
↵
).
- Use the
FN
key to access and navigate the menus and options.
-
In Menu mode
: It increments a numeric value
(▲).
2.6. Error Codes
Err H
Initial zero too high (over FULL SCALE + 10%), for approved models [LF 6]
Err L
Initial zero too low (under FULL SCALE
– 10%), for approved models [LF 6]
Err N
Unstable internal count, this may indicate the load cell or electronics are faulty
-OL-
Overload, full ca9d
