AWT35-100089 Rev AA
12/25
3.6.3 Manual (Toggle) Hold Mode
1. Power up the scale and zero the display, if necessary, by pressing the
ZERO/ON/OFF
key. Be
sure the scale is displaying weight in your preferred unit of measure. Press the
UNIT
key, if
necessary.
2. Press the
HOLD
key to enable this function
The
Hold
annunciator flashes.
3. Step on the scale
If the weight sensed is stable for STB.TIM (15 s) and above the
NLD.RNG
zero range (10 div
= 5 lb, 2 kg), the indicator displays the Hold mode weight. The
Hold
annunciator stops flashing.
4. Press the
TARE
key to repeat the
Hold
weighment or the
HOLD
key to exit the current mode.
If the weight is not stable within the STB.TIM time value (15 sec), the indicator
will display STB.ER. See
