![background image](http://html1.mh-extra.com/html/breas/pv-101/pv-101_service-manual_2806346020.webp)
REMOVING/REPLACING THE MAIN COMPONENTS
PV 101+/PV 102+ Service Manual
3–6
BREAS MEDICAL
Doc. No. 003259 En
Issue: X-1
3.5
Removing and replacing the blower unit
To remove the blower unit:
1
Remove the upper casing (See section 3.2).
2
Remove the main assembly (See section 3.4).
3
Disconnect the motor connectors from the MDA board.
4
Disconnect the flex tube from the blower unit’s air outlet. Disconnect the red sen-
sor tube from the blower unit’s sensor connector.
5
Remove the remaining two nuts that hold the blower unit’s rubber mounts from
underneath the base plate.
6
Lift away the complete blower unit.
To reassemble the blower unit:
•
Reassemble in reverse order.
2
×
M4 Compound nut
Summary of Contents for PV 101+
