![background image](http://html1.mh-extra.com/html/breas/pv-101/pv-101_service-manual_2806346018.webp)
REMOVING/REPLACING THE MAIN COMPONENTS
PV 101+/PV 102+ Service Manual
3–4
BREAS MEDICAL
Doc. No. 003259 En
Issue: X-1
3.4
Removing and reassembling the main assembly
All the main internal components – blower unit, power board and MDA board – are
mounted on the base plate.
To remove the main assembly:
1
Remove the upper casing (See section 3.2).
2
Turn the PV 101+/PV 102+ upside down. Remove the M4 nut that fastens the
blower unit rubber mount.
3
Remove the five screws on the lower casing that hold the base plate.
5
×
TX10
1
×
M4
Compound
nut
Summary of Contents for PV 101+
