54
BATTER BREAD™
The Batter Bread™ Course will mix and bake a pre-packaged cake mix or quick bread.
SWEET CORN BREAD
1 loaf
Eggs, large, room temperature
2
Milk, 80°F/27°C
1 cup
Butter, melted
1/4 cup
Sugar
3/4 cup
Salt
1 tsp
All-Purpose Flour
2 cups
Corn Meal
1 cup
Double Acting Baking Powder
1 TBL
Select Batter Bread™ Course
10
Method:
1. Remove the Bread Pan from the Breadman® Pro. Attach the Kneading Paddle onto the
Shaft. Add ingredients to the Bread Pan in the order listed. Refer to MEASURING YOUR
INGREDIENTS section of this Instruction Manual. Make sure all ingredients, except water,
are at room temperature.
2. Place the Bread Pan into the Breadman® Pro. Push down on the rim until it fits firmly into
place. Close the Lid.
3. Press the
SELECT
Button; choose Course 10, Batter Bread™. Press the
CRUST
Button to
choose crust color. If Delay Bake is desired, press the
TIMER
Buttons to set the Delay
Bake Timer and then press
START
for delay. (See DELAY BAKE TIMER section in this
Instruction Manual) or press the
START
Button for an immediate start.
NOTE: Don’t use the Delay Bake Timer if your recipe includes eggs, fresh milk, yogurt, or other
dairy products, meats, fish, etc. that may spoil.
4. At the beep during the kneading process, check the dough. At this time, push down any
dough or flour that may be on the sides of the Bread Pan. and, if desired, add additional
ingredients (i.e., raisins, nuts, and spices). If necessary, stir ingredients during the rest time.
Refer to the KNEADING AND BAKING COURSES charts in this Instruction Manual to
check the Display Time that the beep will sound.
5. Before the baking begins, remove the Bread Pan from the Bread Maker. Remove the
Kneading Paddle from the batter and place the Bread Pan back into the Bread Maker to
complete the bake process. Removing the paddle will help prevent tearing the cake/loaf
when it is removed from the pan after baking.
6. When your bread is finished baking the Breadman® Pro will beep and “0:00” will appear in
the Display Window. Press the
STOP
Button and open the Lid.
TR900S_OM 9/2/03 4:31 PM Page 57