BRAYER BR4952, Instruction Manual

Page: 6 / 28

6 EN
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specified specifications of power
supply voltage of the unit correspond to the
specifications of your mains. When using the unit in
the mains with 60 Hz frequency, the unit does not
need any additional settings.
• Wipe the fan body with a slightly damp cloth and then
wipe it dry.
ASSEMBLING THE FAN
• Unscrew the fastening nut on the bottom part of the
fan body (2) turning it counterclockwise.
• Pass the power cord through the base (1) halves
opening (pic. 1).
• Match the halves of the base (1) and press them
together until the locks clicking.
• Match the ledges on the bottom part of the fan body
(2) with the grooves in the base (1) (pic. 2).
• Pass the power plug through the fastening nut, screw
the fastening nut turning it clockwise and make sure
that the base (1) is fixed properly (pic. 3).
• Carry the fan by the handle (5).
USING THE FAN
• Place the fan base (1) on a flat, dry and steady
surface.
• Do not place the fanon soft surfaces, such as carpets
with high pile, sofas or beds.
• Insert the power cord plug into the mains socket.
SWITCHING THE FAN ON/OFF AND SELECTING
THE AIRFLOW SPEED
• Turn the operation mode switch (4) knob and set the
necessary airflow speed «1, 2 or 3».
SWITCHING THE FAN BODY OSCILLATION
FUNCTION ON/OFF
• To switch the fan body oscillation on, set the
operation mode switch (4) to the position « ».
• To switch the fan off, set the operation mode switch
(4) knob to the position «0».
CLEANING AND MAINTENANCE
• Before cleaning the fan, switch it off and unplug it.
• Wipe the fan body with a slightly damp cloth and then
wipe it dry.
• Do not use liquid detergents, abrasive cleaners and
any solvents to clean the fan (2).
• To avoid the risk of electric shock provide that no
water or other liquid gets into the fan body.
• To clean the air inlet grid (6), use a vacuum cleaner
with a corresponding attachment.