BRAYER BR4930, Instruction Manual, Page: 8 / 36

8 EN
purifier will switch to the standby mode. Then unplug
the unit.
• To change the speed operation mode, touch the
on/off/operation mode selection button (8) « »,
the speed operation modes are confirmed with the
indicators (9, 10, 11).
• Maximal operation speed is displayed with the
indicator (11) « ».
Ionization mode
• To switch the ionization mode on, touch the button
(12) «
».
• To switch the ionization mode off, touch the button
(12) «
» again.
Fragrance basket
• Remove the aromatic oil container (pic. 6), add some
drops of aromatic oil and install the container back
to its place.
• Resetting the filter operation time
• If during the air purifier operation the indicator (13)
« » lights up and starts flashing, it is necessary to
clean or replace the filter (2).
• Remove the lid (1) by turning it to the position « »
(pic. 1).
• Remove the filter (2) from the air purifier body (5)
(pic. 2).
• Using a vacuum cleaner with a corresponding
attachment clean the outer surface of the filter (2).
• Install the filter (2) into the air purifier body (5) (pic.
3).
• Install the lid (1) back to its place and turn it to the
position « » (pic. 5).
• Switch the air purifier on by touching the on/off/
operation mode selection button (8) « ».
• Touch the button (13) « » and hold it for 3-5
seconds, you will hear a sound signal, and the
indicator « » will go out.
CLEANING AND MAINTENANCE
• Before cleaning the air purifier switch it off and make
sure that the power plug is not inserted into the
mains socket.
• Wipe the unit body (5) with a slightly damp cloth and
then wipe dry.
• Do not use liquid detergents, abrasive cleaners and
any solvents to clean the air purifier.
• To avoid the risk of electric shock provide that no
water or other liquid gets into the air purifier body.
• To clean the air grids (3, 7), use a vacuum cleaner
with a corresponding attachment.
ATTENTION! Before removing the lid (1), make sure
that the power plug is not inserted into the mains
socket.