BRAYER BR4700GN, Instruction Manual

Page: 4 / 23

6 7 en en
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE
ONLY
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using it.
• Use the humidifier at the room temperature from
+10° С to +40°С and
• relative humidity less than 80%.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Check the delivery set.
• Read the safety measures and operating
recommendations.
• Examine the unit for damages; if the unit is damaged,
do not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains.
USING THE ULTRASONIC HUMIDIFIER
• Remove the water tank (1) from the unit body (6),
remove the lid with the «mist» release opening (Abb.
1).
• Turn over the water tank (1), turn the lid (4)
counterclockwise and remove it (Abb. 2).
• Before the first use it is recommended to remove the
filter (3) turning it counterclockwise and to put the
filter (3) into a container with water for 5-10 minutes.
• Install the filter (3) on the lid (4) and thread it rotating
clockwise.
• Fill the water tank (1) with the required amount of
water (Abb. 3).
• Notes: — if the tap water used is hard, use water
cleaned with household filters or mix tap water with
distilled water in proportion 1:1.
• Install the lid (4) on the water inlet (2) and thread it
turning clockwise.
• Place the filled water tank (1) on the unit body (6).
• Wait till the process chamber (5) is filled with water.
• If you want to use the aromatization function, remove
the container (7). Add some drops of water-soluble
aromatic oil and install the container (7) back to its
place (pic 4).
• Notes:
- use water-soluble aromatic oils only
- if you are not going to use the aromatization
function, remove the container (7), wash it with
water, dry and install back to its place
• Insert the power plug into the socket.
• Switch the Ultrasonic humidifier on by turning the
knob (9) clockwise, the indicator will light up green.
• Set the mist release intensity by turning the knob (9).
• To turn the illumination on press the button (8), to
switch the illumination off press the button (8) again.
• If the water tank (1) is empty, the indicator will light
up red.
• Switch the Ultrasonic humidifier off by turning the
knob (9) counterclockwise and unplug the unit.
• Fill the tank (1) with water, install it to its place and
switch the unit on.
• After the unit operation, switch the Ultrasonic
humidifier off by turning the knob (9)
counterclockwise
• and unplug the unit.
CLEANING AND MAINTENANCE
• Hard water causes the appearance of mineral scale
inside the process chamber (5), on the sprayer and
in the water tank (1); mineral scale leads to improper
operation of the humidifier.
• It is recommended to clean the process chamber (5)
and the sprayer weekly, and to change water in the
water tank (1).
• If you are not going to use the Ultrasonic humidifier
for a long
• time:
- pour the water out of the water tank (1) and the
process chamber (5)
WARNING!
Always switch the Ultrasonic humidifier off and unplug
it before maintenance works or cleaning.
- wash and clean the process chamber (5) and the
sprayer
- wash the water tank (1)
- dry the unit thoroughly and take it away for
storage.
WEEkLY CARE
• Once a week wash the water tank (1), the process
chamber (5) and the sprayer with warm water and
neutral detergent and rinse thoroughly with water
(Abb. 5).
• Add some detergent drops on the sprayer and wait
for several minutes. Remove the deposits from the
sprayer surface with a brush (Abb. 6).
• Notes: — you can use scale removal substances for
electric kettles as a cleaning agent for the process
chamber (5) and the sprayer strictly following the
instruction.
• Clean the unit body (6) with a slightly damp cloth and
then wipe the body (6) dry.
• Do not immerse the unit body (6), the power cord and
the power plug into water or other liquids. Provide
that no liquid gets inside the unit body (6).
• Do not use solvents or abrasives to clean the surface
of the body (6) and the water tank (1).
STORAGE
• Clean the Ultrasonic humidifier before taking it away
for storage, make sure that the Ultrasonic humidifier