6
EN
(1) and the outer surfaces do not touch fusible and
inflammable objects.
• Use the unit on healthy undyed and not not permed
hair.
• If your hair is dyed or was permed, use the hair
straightener rarely.
• Before straightening wash your hair with shampoo,
wipe it with a towel, dry with a hairdryer and comb
your hair.
• Insert the power plug into the mains socket.
• Switch the hair straightener on, to do this turn the
power switch/temperature control knob (3) and set
the desired temperature to heat the plates (1) (see
table).
Notes:
-
when switching the unit on for the first time, a
smell from the heating element can appear, this is
normal and it is not covered by warranty.
Hair type
Temperature
Damaged, colored, bleached, fine
from +100°С to +120°С
Normal
from +140°С to +160°С
For professional styling
from +180°С to +200°С
• When the heating plates (1) reach the set
temperature, the indicator (4) will glow constantly.
• Divide the smoothly combed hair into locks about 4-5
cm wide.
• Open hair straightener by pressing the heating plates
(1) together and moving the clamp (2) to the « »
position.
• Place a lock of hair between the heating plates (1).
•
Press the heating plates (1) with slight effort and
glide them till the end of the hair lock.
WARNING:
do not leave the heating plate (1) at one
part of the hair lock for longer than 2 seconds.
• Straighten all hair locks.
•
Cool your hair down before final styling or applying
hair spray.
• Avoid contact of heated surfaces of the hair
straightener with your face, neck and other parts of
your body.
• After using the unit set the power switch/temperature
control knob (3) to the « » position and take the
power plug out of the socket. Let the unit cool down.
•
Note:
-
always switch the unit off and unplug it when
you’re not using it;
- never leave the plugged-in hair straightener
unattended; if you forgot to switch it off, the hair
straightener will be switched off automatically in
60 minutes.
CLEANING AND MAINTENANCE
•
Before cleaning, switch the hair straightener off,
unplug it and let it cool down completely.
instr BR3334.indd 6
instr BR3334.indd 6
09.06.2022 9:41:06
09.06.2022 9:41:06