BRAYER BR3334, Instruction Manual, Page: 5 / 28

5 EN
• Do not allow children to touch the operating surface,
unit body, power cord or power plug during operation
of the unit.
• Be especially careful if children or disabled persons
are near the operating unit.
• During the unit’s operation and breaks between
operation cycles, place the unit out of reach of
children.
• The unit is not intended for usage by physically or
mentally disabled persons (including children) or by
persons with physical, sensory or mental disabilities
or lacking experience or knowledge if they are not
under supervision
• of a person who is responsible for their safety or if
they are not instructed by this person on the usage
of the unit.
• Check the power cord integrity from time to time.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualified personnel to avoid danger.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after the unit was dropped, unplug it
and apply to the service center.
• To avoid damages, transport the unit in original
package only.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specified specifications of power
supply voltage of the unit correspond to the
specifications of your mains. When using the unit in
the mains with 60 Hz frequency, the unit does not
need any additional settings.
• Wipe the unit with a clean, slightly damp cloth to
remove dust, and then wipe it dry.
• Unwind the power cord to its full length while using
the unit.
HAIR STRAIGHTENING
• Place the hair straightener on a flat steady heat-
resistant surface. Make sure that the heating plates
instr BR3334.indd 5 instr BR3334.indd 5 09.06.2022 9:41:06 09.06.2022 9:41:06