BRAYER BR2601, Instruction Manual, Page: 11 / 60

11 EN
• Before closing the door (10), make sure that the
skewer with the food is positioned correctly and
does not come into contact with the upper heating
elements, the minimum distance to the heating
element should be 30 mm.
• Connect the unit to the mains. You will hear sound
signals, the display (3) will show all symbols for
2 seconds. After that the symbol for the baking
program (27) «Bake» will be displayed, the digital
symbols (29) will show the operation time of the
program «30:00» minutes, the symbols (30) will
show the cooking temperature «180°C». Operation
time and cooking temperature in the baking program
«Bake» are set by default.
• Consequently pressing the button (31) «PROGRAM»
select the cooking program «Skewer - Roast» (see
the table).
• To switch the mini-oven on, press the button (33)
«START/STOP», the mini-oven will switch on, the
buttons (31 and 32) illumination will glow constantly.
• Press the button (32) «LIGHTING» to switch the
illumination in the mini-oven on. Press the button (32)
«LIGHTING» again to switch the illumination off.
• When the set time is over, you will hear sound
signals, the mini-oven will switch off. Unplug the unit.
• Always check the readiness of the product. When
piercing the product, clear meat juice should appear
without traces of blood.
• You can change the settings of the cooking program
«Skewer - Roast» (see the table):
- by turning the knob (34) «TIME» clockwise or
counterclockwise you can set the operation time of
the mini-oven, the operation time will be shown on
the display (3) with digital symbols (29). Operation
time setting step is 1 minute, maximal operation
time is 90 minutes;
- by turning the knob (35) «TEMPERATURE °С»
clockwise or counterclockwise you can set the
cooking temperature, the cooking temperature will
be shown on the display (3) with digital symbols
(30). Temperature setting step is 5°С, maximal
temperature is 230°С.
• If you need to switch the mini-oven off, press the
button (33) «START/STOP».
• To remove the skewer (21) with the cooked product,
take the handle of the skewer holder (26), in places
(25) to grip the skewer (21), grab the skewer (21), lift
the left side (20) of the skewer (21) off the support
(18) and remove the skewer (21) from the drive (8).
• Put the skewer (21) with the cooked products on a
heat-resistant chopping board or on a plate. Turn the
screws (23) counterclockwise to loosen the clamps
(22) and remove them from the skewer (21), remove
the skewer (21) from the ready product.
Cooking program/cooking mode setting table: