15
EN
the valve installation location (3) on the lid (5), if there
is any dirt, remove it and wipe the valve installation
location (3) with a damp cloth.
• Remove the inner lid.
• Inspect the inner parts of the valves for dirt or remains
of food, if any, remove them, wipe or rinse the lid (5)
from the inside and dry it.
• If there is dirt on the inner wall of the body (9), remove
the dirt and wipe the surface with a slightly damp cloth,
then wipe it dry.
• Wipe the surface of the heating element (only when it
is cold) with a soft, slightly damp cloth, do not let water
get inside the multicooker body.
• Do not immerse the multicooker body, the power cord
and the power cord plug into water or any other liquids.
STORAGE
• Before putting the multicooker for long-term storage,
disconnect it from the mains, let the device cool down
• Clean the Multicooker before taking it away for storage.
• Keep the unit in a dry cool place out of reach of children
and disabled persons.
Troubleshooting table
1
Malfunction
Possible reason
Solution
The lid of the
multicooker is
difficult to close
The inner lid with the
silicone gasket is not
correctly installed.
Check that the inner
lid and silicone
gasket are correctly
installed.
The float valve is stuck
in the upper position.
Use a thin object to
push the float valve
down.
2
The lid of the
multicooker does
not open
The steam pressure has
not been relieved in the
multicooker.
Relieve the
pressure in the
multicooker using
the methods
described in the
section «How to
properly open
the lid of the
multicooker».
Open the lid of
the multicooker
only when the
steam pressure is
completely relieved.
The float valve is stuck
in the upper position.
Use a thin object to
push the float valve
down.