BRAYER BR2006, Instruction Manual, Page: 9 / 48

9 EN
• To set the temperature press the « » button, the
digital temperature symbols on the display (12) will
flash.
• By pressing the buttons (13) « , » set the required
operating surfaces (7) heating temperature. You can
set the operating surfaces (7) heating temperature
from 90°C to 240°C with a 5°C setting increment.
After setting the desired temperature the heating
element will be on in 4 seconds, the sound signals
will be heard after the set temperature is reached,
and the digital temperature symbols on the display
(12) will light constantly. The grill is ready for cooking.
Notes:
- the temperature will be maintained within the set
limits starting from the second operating surfaces
(7) heating cycle, the digital temperature symbols
will light constantly, the sound signals will be
deactivated;
- you can change the operating surfaces (7) heating
temperature at any time during food cooking by
pressing the « , » buttons;
- when setting the maximum operating surfaces
(7) heating temperature at 240°C and using the
unit as a contact grill, the operating surfaces
temperature is stabilized and maintained at 225°C
after 3-5 heating/cooling cycles.
• To set the notification time press the « » button, the
digital time symbols on the display (12) will flash. You
can set the time up to 90 minutes with a 1 minute
setting increment. The sound signals will be heard at
the end of the set time.
Note:
the sound signals notify about the set time
expiration, and the grill does not turn off, take the food
out the grill immediately after cooking, if the food is left
in the turned on grill for a long time, it may inflame.
• Wait for the working surfaces (7) to heat, the digital
temperature symbols on the display (12) light
constantly.
• Take the handle (3) and open the grill.
• Carefully put the products on the lower frying plate,
avoid burns by possible splashes of juice or fat
dripping from the products.
• Take the handle (3) and lower the upper frying plate
on the products.
Note:
depending on the thickness of the cooked
products you can adjust the clearance between the
frying plates (7). To do this, move the lock (5) handle to
the required position «Low–High».
•
After you finish cooking, take the handle (3) and lift
the upper frying plate.
• Put the prepared products into an appropriate dish;
use wooden or heat-resistant plastic kitchen tools to
remove the products.
• To turn the grill off, press and hold the « » button
(9), disconnect the power plug from the socket.