BRAYER BR2006, Instruction Manual, Page: 10 / 48

10 EN
Note: if no action is taken before turning the grill off
with the « » button (9), in this case the grill will be
automatically turned off after 60 minutes.
Using the grill as a cooking unit (pic. 3)
• You can use the grill as a flat frying surface.
• Before connecting the power plug to the mains
socket open the grill. To do this, take the handle (3)
and lift the upper part of the grill.
• Press the button (4) «180°» and open the grill
completely.
• Connect the power plug to a socket, turn the grill
on by pressing the « » button (9), press the « »
button and using the « , » buttons set the required
operating surfaces (7) heating temperature, press
the « » button again and set the required notification
time with the « , » buttons.
• • Wait for the working surfaces (7) to heat, and the
digital temperature symbols on the display (12) will
light constantly.
• Carefully put the products on the frying plates, avoid
burns by possible splashes of juice or fat dripping
from the products.
• Put the prepared products into an appropriate dish;
use wooden or heat-resistant plastic kitchen tools to
remove the products.
• To turn the grill off, press and hold the « » button
(9), disconnect the power plug from the socket.
• Wait until the grill cools down completely, then lift the
upper part of the grill, press the button (4) «180°»
and fold the upper and the lower (1) parts together.
• To fix the lower and the upper parts of the grill set the
lock (5) handle to the position «Lock».
MALFUNCTION SYMBOLS
• In case of malfunction a sound signal will be heard,
the quickly flashing symbols «ER 1», «ER 2» or «ER
3» will be shown the display (12), the buttons on the
control panel (8) will be inactive.
1. In case of the temperature sensor malfunction or
breakdown, after the grill has been operating for 2
minutes 40 seconds, the display (12) will show a
quickly flashing symbol «ER 1» (Fig. 4), the display
illumination (12) will be on, and a sound signal will
be heard, the buttons on the control panel (8) will
be inactive.
2. If the temperature sensor malfunction is revealed
during the grill operation, the unit will run for 5
minutes, when the operating surfaces (7) cool
below 20°C, the display (12) will show the «ER 2»
symbol (Fig. 5).
3. If the operating surfaces (7) temperature exceeds
320°C, the display (12) will show a quickly flashing
symbol «ER 3» (Fig. 5), the display illumination (12)
will be on, and a sound signal will be heard, the
buttons on the control panel (8) will be inactive.