BRAYER BR1304, Instruction Manual

Page: 9 / 44

9 EN
• Insert the dough hooks (11) or the beaters (12) into the
appropriate holes of the handheld mixer (1) until they
click. Both attachments should be fixed in the holes of
the handheld mixer.
• Press the button (7) and lift the bracket (10) until it
locks in the upper position.
• Install the handheld mixer (1) on the bracket (10),
aligning the installation location of the lower part of the
handheld mixer (1) with the locks on the bracket (10),
press the handle of the mixer (5) to activate the lock.
Make sure that the handheld mixer (1) is securely fixed
(Fig. 1).
• Place the food bowl (9) on the base (8). The number
of ingredients placed in the bowl (9) should not exceed
1.5 kg.
• Press the button (7) and lower the bracket (10) until it
locks in the lower position.
• Plug the power cord into the power outlet.
• Turn on the mixer with the operating mode switch
(3) and select the desired speed of rotation of the
attachments «1, 2, 3, 4, 5».
• When pressing and holding the «TURBO» button (4),
the mixer will turn on at maximum speed.
• Do not touch the rotating parts of the device while the
mixer is operating. Do not allow hair or loose-hanging
items of clothing to get into the rotation zone of the
attachments (11 or 12).
• Do not allow foreign objects to enter the bowl (9).
• Do not close the ventilation holes on the hand mixer
body (1), this may cause the electric motor to overheat.
Note: while kneading the dough, part of the flour may
stick to the inner surface of the bowl (9), in this case,
turn off the mixer by setting the operating mode switch
(3) to the «0» position, unplug the power cord from the
power outlet, scrape the flour from the inner surface
of the bowl (9) with a plastic spatula, and after that,
continue kneading the dough.
•
After the operation is finished, set the operating
mode switch (3) to the «0» position and unplug the
power cord from the power outlet.
• Press the button (7) and lift the bracket (10) with the
hand mixer (1) installed until it locks in the upper
position.
• Grasp the handle of the mixer (5) press and hold the
lock button (6), remove the handheld mixer (1) from
the bracket (10) in the upward direction.
• While holding the attachments (11) or the beaters
(12), press the button (2) and disconnect the
attachments.
Note: the attachments can only be disconnected if the
operating mode switch (3) is set to the «0» position.
• Remove the bowl (9) and take the products out of it.
• Clean the used attachments (11 or 12) and the mixer
bowl (9).
CLEANING AND MAINTENANCE
• Turn off the device and unplug the power cord from
the power outlet.