BRAYER BR1247 Instruction Manual Download Page 5

5

EN

SAFETY MEASURES AND OPERATION 

RECOMMENDATIONS

Read the operation instructions carefully before 

using the unit, after reading keep them for future 

reference.

•  Use the unit for its intended purpose only, as it is 

stated in this manual.

•  Mishandling the unit can lead to its breakage and 

cause harm to the user or damage to the user’s 

property, which is not covered by warranty.

•  Make sure that the operating voltage of the unit 

indicated on the label corresponds to your home 

mains voltage. 

ATTENTION! Continuous operation time should 

not exceed 30 seconds while using the blender 

attachment, 10 seconds while using the chopper 

attachment and 1 minute while using the whisk 

attachment, no more than 1 minute while using the 

potato mash making attachment.. Make at least a 

3-minute break between operation cycles.

•  Do not use the unit outdoors.

•  It is recommended not to use the unit during lightning 

storms.

•  Protect the unit from impacts, falling, vibrations and 

other mechanical stress.

•  Never leave the unit connected to the mains 

unattended.

•  Do not use the unit near heating appliances, heat 

sources or open flame.

•  Do not use the unit in places where aerosols are used 

or sprayed, and in proximity to inflammable liquids.

•  Do not use the unit in proximity to the kitchen sink, in 

bathrooms, near swimming pools or other containers 

filled with water.

•  If the unit is dropped into water, unplug it immediately, 

and only then you can take the unit out of water. Apply 

to the authorized service center for testing or repairing 

the unit.

•  Do not let the power cord touch hot surfaces and sharp 

edges of furniture.

•  Unplug the unit after usage or before cleaning. When 

unplugging the unit, hold the power plug and carefully 

remove it from the mains socket, do not pull the power 

cord, as this can lead to its damage and cause a short 

circuit.

•  Do not touch the unit body, the power cord and the 

power plug with wet hands.

• 

Before using the unit for the first time, thoroughly wash 

all the removable attachments and containers that will 

contact food.

•  Use only the parts supplied.

•  Do not touch rotating parts of the unit. Do not let hair 

or free hanging clothes get into the rotation area of the 

blender attachment knife or whisk.

•  Before using the unit, make sure that the attachments 

are installed properly and fixed. 

• 

Place the chopper bowl on a flat and steady surface.

•  Put the products into the chopper bowl before switching 

the unit on. Do not switch the unit on if the chopper bowl 

is empty.

Summary of Contents for BR1247





















































Reviews: