11
EN
• Wash the removable parts (5, 6, 12, 14) with warm
water and a neutral detergent, then rinse and dry,
insert the filter (5) into the holder (6), install the filter
holder (5) back to its place, turn the funnel to the
operating position « » (pic. 1).
•
Do not immerse the coffee maker, the power cord
and the power plug into water or any other liquids.
STORAGE
•
Before taking the coffee maker away for long storage,
unplug it and let it cool down completely.
•
Clean the coffee maker.
•
Always drain the remaining water from the water
tank. Do not store the coffee maker with the filled
water tank at temperature below 0°C.
•
Keep the coffee maker in a dry cool place out of
reach of children and disabled persons.
Troubles and troubleshooting
Malfunction
Cause
Solution
The coffee maker
can’t be switched on
The power plug
is not connected
to the mains, the
malfunction of the
mains socket
Insert the power plug into
the mains socket.
Make sure that the
mains socket is working
properly by connecting
another known good
electric appliance to it.
If the coffee maker does
not switch on, contact the
service center
Coffee leakage from
the flask
The flask is installed
improperly
Make sure that the flask
is set properly on the
removable tray grid
Water is leaking
from the bottom part
of the coffee maker
body
The tray is full
Remove the tray and
pour out the liquid
The coffee maker is
malfunctioning
Apply to the service
center for testing or
repairing the coffee
maker
Water is leaking
from the outer side
of the filter holder
Ground coffee on
the edges of the
coffee filter
Make sure that there is
no ground coffee on the
edges of the coffee filter
