10 EN
5.
Set the filter holder (5) to the position «
», the
filter holder (5) ledges should match the grooves in
the boiler. Turn the filter holder (5) counterclockwise
to the position « » (pic. 1).
6.
Place the flask (14) on the grid (2).
7. Insert the power plug into the mains socket.
8. Set the operation mode switch (7) to the position «
brew
», the light indicator (8) will light up, the heating
element will switch on and water will start pouring
into the flask (14) under pressure.
9. In 10-15 seconds set the operation mode switch
(7) to the position «
», and the indicator (8) will
go out.
10.
Place the flask (14) under the tip (11) and set the
operation mode switch (7) to the position «
steam
», in
5 seconds set the operation mode switch (7) to the
position «
».
11.
Set the flask (14) on the grid (2), wait for 10-15
minutes and switch the water supply on by setting
the switch (7) to the position «
brew
», wait until the
cleaning agent release stops completely.
12. Set the operation mode switch (7) to the position «
» to switch the coffee maker off and to release the
pressure. Unplug the unit, unscrew the lid (9) and
fill the tank with clean water. Insert the power plug
into the mains socket.
13.
Set the flask (14) under the tip (11) and switch the
steam supply on «
steam
», in 15 seconds switch the
steam supply off and place the flask (14) on the
grid (2). Switch the water supply on and wait until
the water release stops completely.
14. Set the operation mode switch (7) to the position «
» to switch the coffee maker off and to release
the pressure.
• If necessary, repeat the washing of the coffee maker
2-3 times.
CLEANING AND CARE
•
Always switch the coffee maker off and unplug it
before cleaning.
•
Let the coffee maker cool down completely and clean
the outer surfaces of the unit body with a soft, slightly
damp cloth, then wipe dry.
•
Use soft detergents to remove dirt; do not use metal
brushes, abrasive detergents and solvents.
• Remove the water tank lid (9) by turning it
counterclockwise, turn the coffee maker upside down
and drain the remaining water from the water tank,
screw the lid (9).
•
If the filter (6) openings are blocked with the ground
coffee, clean them with a small brush.
• Remove the grid (2) and the tray (1), pour the water
out, wash the tray (1) and the grid (2), rinse them and
dry. Install the tray (1) and the grid (2) back to their
places.
