10
EN
Water cooling mode
•
Press the «Quick cooling» button (16), the symbol
(22) « » will light up and will be flashing, the
thermopot cooling fan will switch on. To switch the
cooling mode off, press the «Quick cooling» button
(16) again, the « » symbol (22) will go out.
Water level scale
•
You can control the water level in the thermopot flask
(6) with symbols (21):
- « » - the thermopot flask is filled with water by
3/3 of its capacity.
- « » - the thermopot flask is filled by 2/3 of its
capacity.
- « » - low water level, the thermopot flask is filled
by 1/3 of its capacity, it is necessary to fill the
thermopot flask with water, otherwise the heating
element will not switch on.
•
Remove the lid (9), to do this, press the lid lock
handle (10), take it and remove the lid (9) (pic. 1). Fill
the thermopot with water using a suitable cookware,
do not exceed the maximal water level mark «FULL»
on the inner surface of the flask (6). Do not fill
the thermopot directly from the faucet; to fill the
thermopot use a suitable cookware (pic. 3).
• The thermopot will switch on in the water boiling
mode, after water boiling you will hear sound signals
and the thermopot will be switched to the hot water
- (26) «
»- hot water keeping mode up to
«55°C», the temperature «55°C» is set by default.
To change the water heating up temperature use
the buttons (24) «-/+», the range of temperature
selection is from 50°C to 64°C.
- (25) «
» - hot water keeping mode up to
«45°C», the temperature «45°C» is set by default.
To change the water heating up temperature use
the buttons (24) «-/+», the range of temperature
selection is from 40°C to 49°C.
Note:
- when the hot water keeping warm is set below
40°C, the symbols «- -» will be shown instead of
digital symbols (20).
- (23) « » - switching on the long boiling mode,
this mode is used to reduce the level of chlorine
dissolved in water. In this mode water is heated up
to 100°C, the symbol (27) «
» will be flashing,
water will be boiling for 3 minutes, after that the
symbol (27) «
» will go out, you will hear
sound signals and the thermopot will be switched
to the hot water keeping mode for coffee brewing
(18) « », the water temperature «85°C» will be
shown with symbols (20).
•
Hot water keeping modes for black tea «
», coffee
« », herbal tea « », water temperature in a range
of 50-64 °C «
» and water temperature 40-49 °C
«
» can be selected with buttons (24) «-/+».
