18
Series 70
Servo NXT - EtherNet/IP
Installation, Operation and Maintenance Manual
6.0 Quick Start Guide
1. Upload the EDS file for the Servo NXT EIP
into the scanner that will be establishing the
network connection.
2. Connect the Servo NXT EIP to the EtherNet/IP
network through the M12 connector.
3. Assign the Servo NXT EIP an IP address
through the DHCP server.
a. Alternatively, assign an address to the Servo
NXT EIP through the TCP/IP object and set it
to use the address set in memory.
4. Establish that explicit messages can be
exchanged with the Servo NXT EIP through
the network scanner.
a. Data received should align with the
information contained in the EDS file. E.g.
Identity Object class and instance attributes
5. Establish an implicit connection with the
Servo NXT EIP using the Connection Manager
attributes defined in the EDS file.
a. The Assembly object data attributes for
the configuration array should be defined
before the connection is established, as
they can only be changed before the
connection is established. Otherwise, the
default values in the EDS file will be used.
