6
AUTO-SEARCH
This operation should only be carried out if a correct code has not been
found with the “code entry” procedure; its duration can be about 20 min.
1) Turn on the appliance
2) Press and hold, for about 5 seconds,
OK+
keys
of the Decoder or TV
(depending on where you want to perform the automatic search) until
the LED lights up, then release the key.
3) Point the remote control towards the appliance. Press and release
key of the Decoder or the TV
, automatic search will start, indicated by a
series of led flashes.
4)
As soon as the appliance switches off, immediately press OK button
to
stop the search and store the code.
5) Turn on the appliance and try the various buttons on the remote control if
the code found is not correct repeat the procedure from point 2.
After all the codes have been tested, the LED will stop flashing.
CODE REMINDER
1) To find out the stored code,
press and hold OK+
keys of the De-
coder or TV
(depending on the code you want to identify) for about 5
seconds, release as soon as the LED lights up.
2) Press
OK
button, the LED will flash briefly.
3) Count the number of LED flashes which will indicate the digits of the en-
tered code.
Ex. code 1380:
- 1 flash followed by a pause of 1 sec. = 1
- 3 flashes followed by a pause of 1 sec. = 3
- 8 flashes followed by a pause of 1 sec. = 8
- 10 flashes followed by a pause of 1 sec. = 0
4) Take note of the code in order to insert it in case of loss of the code in
memory.
TV CODE LEARNING
If you were unable to find a code suitable for your TV, you can use the code
learning function.
Note: In order to copy the codes, the original TV remote control must be
functional.
1) Press and hold the LEARN + AV keys for about 5 seconds
, then release
the keys, the LED will start to flash quickly.
2) Place Uniko remote control in front of the remote control to be copied at
