Bravo Bravo Tamper, Quick Start Manual

Page: 9 / 12

9
Firstly, remove the screw cap using a coin, in the inner part of the
screw cap, you will find a small black Allen bolt. In order to minimize
the pressure, simply unscrew the black Allen bolt little by little till you get
the pressure you desire (within the range of 34lbs to 26lbs). The pressure
will decrease approximately 2,5lbs per each 1mm the black Allen bolt is
unscrewed. If you remove the black Allen bolt, the pressure will increase
to its maximum: 37lbs. Mind you, once you have reached the desired
pressure you must use a thread seal tape to keep the black Allen bolt in
its chosen place.