
EN
E
Copyright Bravilor Bonamat B.V.
5
4.
EVERYDAY USAGE
READ
!
Read the safety manual (700.403.713)
During use, the default factory setting may not be considered to be correct or adequate for the situation
in which the device is being used. These settings can be adjusted
−
by personnel with the appropriate
authorization
−
in accordance with the instructions in Chapter 6.
Consequently, the present chapter (4.) only describes normal, everyday use of the device by any user.
Periodic maintenance activities for personnel with the appropriate authorization are described in Chapter 5.
4.1
Signalling and display
1
2
3
6
5
4
Fig. 2 Signalling and display
1. Water level light
2. Reset button
3. Temperature set (up)
4. Temperature set (down)
5. Cooling run light
6. Display
The following data can be read off the device during operations:
D
Water level light (red)
: Off
−
> normal
: On
−
> level too low
D
Cooling running light
: Off
−
> setting temperature reached
: On
−
> cooling
D
Digital display
A. Value
−
> set temperature
B. Flashing value
−
> cooling (actual temperature)
C. Alternately temp/C
−
code
−
> cleaning/filter
−
replacement time is up
D. Flashing C
−
code
−
> when setting the cleaning/filter
−
replacement time
E. Error code (E)
Type I
Type II
Cold water button /
Operation button light
Sparkling water button
Cold water button /
Operation button light
D
Cold water button light
1. The cold water button light will always be ON in blue when device is running normally.
2. The cold water button light will flash when cleaning/filter
−
replacement time is up.
3. The cold water button light will go off when something wrong with the temperature sensor.
4.2
Operation
4.2.1
Drawing off cold water
When water has reached the set temperature:
D
Place a cup under the water outlet and press the cold water button to draw off a refreshing
cup of cold water.
D
Place a cup under the water outlet and press the sparkling water button to draw off a
refreshing cup of sparkling water (Type II only).