EN
E
Copyright Bravilor Bonamat B.V.
4
3.2.3
Filter installation and replacement (optional)
A
B
D
Rotate like the right arrow (B) to open the filter.
D
Rotate like the left arrow (A) to lock the filter.
3.2.4
Using the device the first time
TIP
−
The first time the device is used, it makes use of the default factory settings. At a later date,
authorized personnel
can change these settings if required.
−
The control system equates with a power failure memory function. See Chapter 6.
−
The first time the device is used, it takes approx. 30 minutes before the water has reached the
desired temperature.
D
Activate the device by putting the plug into the socket. The display then shows the temperature.
The water tank will be filled until the water level is reached. Press the up or down button to set the
desired temperature.
D
Wait approx. 3 minutes until the reservoir has filled.
D
Clean your Chiller following §5.2 (Flushing the water system)
D
Now only remove the plug from the socket for maintenance repairs or long periods of inactivity.