24
GB
KLV-40BX400/KLV-40BX401/KLV-32/26/22BX300/KLV-32/26/22BX301
4-168-830-
11
(2)
“Audio Filter”
Improves the sound of individual channels when distortion occurs in mono broadcasts
in TV system “B/G”, “I” and “D/K”.
•
You cannot receive stereo or dual sound when “High” is selected.
“Skip”
Skips unused channels when you press
PROG +/–
to select channels. (You can still
select a skipped channel using the number buttons.)
“Colour System”
Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43” or
“PAL60”) according to the channel.
“Signal Booster” (Intelligent Signal Booster)
Improves the picture quality if the TV signal is too strong or weak.
Press
F
/
f
to select either “Off” if the signal is too strong (picture distorted; picture with
lines; signal interference) or “Auto” if the signal is weak (snowy picture), then press
.
“Signal Level”
Displays the signal level for programme currently being watched.
FM Radio Set-up
(only in FM Radio
mode)
Preset up to 30 FM radio stations that can be received in your area.
“Auto Tuning”
Allows you to automatically tune and store all the available channels.
1
Select “Auto Tuning”, then press
.
2
Select “OK” to automatically tune in all the available channels.
“FM Radio Presets”
Manually tune and store each available channel one at a time.
1
Press
F
/
f
to select the desired FM radio station position, then press
.
2
Press
F
/
f
to search the FM radio stations. Searching stops automatically when a
station is tuned in. If the station has a noisy sound, you may be able to improve the
sound quality by pressing
G
/
g
. Press
to store the FM radio station.
You may edit the FM radio station label. Press
F
/
f
to select alphanumeric
characters for the label, then press
. Repeat steps 1 to 2 to preset other FM radio
stations.
•
To enable this feature, access to FM Radio mode by using MENU (page 15), then preset
your desired FM radio stations according to the steps mentioned above.
Parental Lock
PIN Code
Allows you to set up TV to block channel or external input. Use 0-9 on the remote to
enter a four-digit PIN code.
Change PIN Code
Selects to change your PIN code.
Programme Block
Blocks an individual channel from being watched.
To view a blocked channel, select “Unblocked”.
External Input Lock
Locks an external input from being watched.
To view a blocked external input, select “Unblocked”.
• Entering the correct PIN code for blocked channel or external input will temporarily deactivates the “Parental Lock” feature.
To reactivate the “Parental Lock” settings, turn off and on the TV.
z
• If you lost your PIN code, see page 31.
red
(weak)
amber
(average)
green
(good)
Downloaded From TV-Manual.com Manuals
