07
-
2011
-
Rev.00
5.
20
Part 5 Control Panel
5.1 CONTROL PANEL AND ITS DESCRIPTION
The control panel consist in three different buttons:
P1
-
Emergency Stop Button
In case the Solo Gyps Drywall panel hoist should work improperly or there should be an urgent need to
block all the moving activities of the device, press this button to cut off the power supply.
P2
-
Load Cradle Rising Button
Keep pushed this button the load cradle will raise from the lower position to the upper position of the
device
P3
-
Load Cradle Lowering Button
Keep pushed this button the load cradle will lift from the upper position to the lower position of the de-
vice.
5.2 FUNCTION TEST
5.2.1
Press and keep pressed the load cradle rising button
P2
to allow the raising of the load cradle. If you
want to stop the raising release the button.
5.2.2
Press and keep pressed the load cradle lowering button
P3
to allow the lowering of the load cradle. If
you want to stop the lowering release the button.
5.2.3
P1
Stop/Emergency working test.
With the Load cradle running, press the
P1
Emergency Stop Button.
The load cradle must immediately stop.
5.2.4
The Working Test procedure is finished.
P3:Load Cradle Lowering Button
P2:Load Cradle Rising Button
P1:Stop Emergency Button
09
-
2020
-
Rev 00
