12.
3.5mm audio in port
TOP
3. GETTING STARTED
Charging your BRAVEN
1.
Before using your BRAVEN for the first time, charge the unit until the charge indicator light turns
off, indicating a full charge (typically 2 to 4 hours).
2.
For a faster charge, plug the included USB-to-Micro-USB cable into the included wall power
adapter. Plug the Micro-USB connector end into the BRAVEN. You can also plug the USB end into
a powered USB port on a computer to charge your BRAVEN, but charge time will be slower when
charging from a computer than it will when charging from a wall outlet.
3.
The LED light closest to the Power ON switch will illuminate white to indicate a charge has
started. When the white light turns off, the BRAVEN is fully charged and you are ready to go.
Turning on your BRAVEN
1.
Slide the power switch to the up position to turn on the BRAVEN, and down to turn the speaker off.
2.
When the speaker is powered on, the LED light will flash every 6 seconds, indicating that the power
is on.
3.
To check battery status, press the battery check button. The current battery level will be indicated
by one of three colors:
1.
White light = 50 - 100%
2.
Blue = 10 - 50%
3.
Red light = 0 - 10%
Bluetooth pairing
Your BRAVEN speaker can sync wirelessly with most Bluetooth enabled devices and will remember the last
8 wireless connections. The BRAVEN is capable of being paired with two devices simultaneously, though
audio can only be played from one device at a time.
Connecting with Bluetooth*
