CoLinkEx JTAG/SWD adapter
www.bravekit.com
3
Introduction
CoLinkEx is a hardware-debugging adapter, which supports SW debugging and supports ARM Cortex M
devices, it supports debugging in CooCox software and Keil RealView MDK. Main features of LPC1343-HB
module. In addition, ColinkEx can supply target board with 3.3V or 5V via JTAG connector
1.
Features of CoLinkEX adapter:
Support JTAG and SW interfaces for Cortex-M microcontrollers
Supported in Coocox IDE (COIDE) and Keil RealView MDK (with plugin)
USB-B connector
Support firmware upgrade via USB
Standard 20-pin JTAG connector
Can supply target board with 3.3V or 5V via JTAG connector
4 LEDs for status of programmer
Compact size 55х55х18mm
2.
Elements of CoLinkEx programmer
3V3 voltage regulator
“PWR” LED
“ERROR” LED
“Connect” LED
USB connector
“BUSY” LED
USB bootloader
jumper, JP1
3V3 jumper for
supply target board
3V3 jumper for
supply target board
