Page 32
Maintenance and Lubrication Schedule
Roll stop pivot points (2)
Roll stop latch pivot bearings (2)
Roll stop latch roller bearing (2)
Gear link assembly bearings (4)
Gear link assembly teeth (2)
Outboard platform bearings (2)
Platform fold link bearings (4)
Platform fold gear rack bearings (4)
Platform fold gear rack teeth (2)
Lift-Tite
™
latches (tower pivot points - 2)
Lift-Tite
™
latch gas (dampening) spring
pivot points (2 springs - 4 points)
Inspect Lift-Tite
™
latches and gas
(dampening) springs for wear
or damage (bent, deformed or
misaligned), positive securement (lock
nuts / external snap rings) and proper
operation
Inspect roll stop for proper operation
Inspect roll stop latch for proper
operation, positive securement, and
detached or missing spring(s)
Adjust fold pressure
Platform slide tracks
Outer platform side plates (4 places)
and platform slide tracks (2)
Apply Light Oil - See Lubrication
Diagram
Apply Light Oil - See Lubrication
Diagram
Apply Light Oil - See Lubrication
Diagram
Apply Light Oil - See Lubrication
Diagram
Apply Door Ease - See Lubrication
Diagram
Apply Light Grease - See Lubrication
Diagram
Apply Light Oil - See Lubrication
Diagram
Apply Light Grease - See Lubrication
Diagram
Apply Door Ease - See Lubrication
Diagram
Apply Light Oil - See Lubrication
Diagram
Apply Light Oil - See Lubrication
Diagram
Resecure, replace damaged parts or
otherwise correct as needed. Note:
Apply Light Grease to Lift-Tite
™
latch
tower pivot point if replacing latch
Correct or replace damaged parts.
Correct or replace damaged parts and/
or relubricate. See Lubrication Diagram
See service manual
Extend outer platform and use
compressed air to remove any debris in
the platform slide plate tracks
Apply Door Ease to top and bottom
edges of outer platform side plates and
inside edges of platform slide tracks.
See Lubrication Diagram
750
Cycles
Summary of Contents for Century 2 CLXT
Page 42: ...Page 40...
