11
Oral-B brush heads feature light blue INDICATOR
®
bristles to help you monitor brush head replace-
ment need. With thorough brushing, twice a day for
two minutes, the blue color will fade halfway down
approximately in a 3-month period. If the bristles
splay before the color recedes, you may exert too
much pressure on teeth and gums.
We do not recommend using the Oral-B FlossAction
or Oral-B 3D White brush head with braces.
Synchronizing your toothbrush
To avoid interference of display messages when
using more than one Oral-B Black 7000 toothbrush
with SmartGuide in the same household, you need to
assign the handles to their respective SmartGuide.
You can synchronize a maximum of 2 handles with
one SmartGuide. To do so, push the «h/min» button
in the battery compartment for at least 3 seconds.
The SmartGuide shows «L---». Turn on your handle
to start the synchronization process. It is finished
when «L-1-» is displayed. Turn off the handle. To
assign a second handle to the same SmartGuide
turn on the other handle until «L-2-» is displayed.
After having synchronized the second handle, «Full»
will be displayed. Exit the synchronization mode by
pressing the «h/min» or «set» button, otherwise it will
end automatically after 30 seconds.
Cleaning recommendations
After brushing, rinse your brush head under running
water with the handle switched on. Switch off and
remove the brush head. Clean handle and brush head
separately; wipe them dry before reassembling.
Disassemble the charging unit before cleaning. Brush
head compartment and protective cover are dishwash-
er-safe. Both basic charger and SmartGuide should be
cleaned with a damp cloth only. The removable inner
part of the travel case (m) is dishwasher-safe. The outer
case should only be wiped clean with a damp cloth
(picture 5, page 3). Make sure that travel case parts are
completely dry before reassembling and toothbrush/
brush heads are dry before storing in the travel case.
Note: Clean stains on the travel case surface
immediately. Store travel case in a clean and dry place.
Wall mount
Use the adhesive ring (l) with the wall mount (k) if you
prefer to mount the SmartGuide on a wall, mirror or
other surface. Make sure the chosen surface is clean
and dry before adhering. Stick the adhesive ring on
the even side of the wall mount and press it firmly to
the wall. Wait 24h before sliding the SmartGuide
holder (j) into the fixed wall mount. Place the
SmartGuide into its holder (picture C, page 2). The
adhesive ring will not work on dirt-repellent surfaces.
Subject to change without notice.
Product contains batteries and/or recyclable
electric waste. For environment protection
do not dispose in household waste, but for
recycling take to electric waste collection points
provided in your country.
Environmental Notice
This product contains rechargeable batteries.
In the interest of protecting the environment,
please do not dispose of the product in the
household waste at the end of its useful life.
Disposal can take place at an Oral-B Braun Service
Centre, or at approved recycling or disposing
locations in accordance with local regulations.
Guarantee
We grant 2 years guarantee on the product
commencing on the date of purchase. Within the
guarantee period we will eliminate, free of charge,
any defects in the appliance resulting from faults in
materials or workmanship, either by repairing or
replacing the complete appliance as we may choose.
This guarantee extends to every country where this appli-
ance is supplied by Braun or its appointed distributor.
This guarantee does not cover: damage due to
improper use, normal wear or use, especially
regarding the brush heads, as well as defects that
have a negligible effect on the value or operation
of the appliance. The guarantee becomes void if
repairs are undertaken by unauthorised persons and
if original Braun parts are not used.
To obtain service within the guarantee period, hand
in or send the complete appliance with your sales
receipt to an authorised Oral-B Braun Customer
Service Centre.
Warranty replacement brush heads
Oral-B warranty will be voided if electric recharge-
able handle damage is found to be attributed to the
use of non-Oral-B replacement brush heads.
Oral-B does not recommend the use of non Oral-B
replacement brush heads.
•
Oral-B has no control over the quality of non-
Oral-B replacement brush heads. Therefore,
we cannot ensure the cleaning performance
of non-Oral-B replacement brush heads, as
communicated with the electric rechargeable
handle at time of initial purchase.
•
Oral-B cannot ensure a good fit of non-Oral-B
replacement brush heads.
•
Oral-B cannot predict the long-term effect of non-
Oral-B replacement brush heads on handle wear.
All Oral-B replacement brush heads carry the Oral-B
logo and meet Oral-B’s high quality standards.
Oral-B does not sell replacement brush heads or
handle parts under any other brand name.
96858577_D34_Black_China.indd 11
96858577_D34_Black_China.indd 11
30.04.14 08:46
30.04.14 08:46
CSS APPROVED Effective Date 7May2014 GMT - Printed 22May2014 Page 10 of 12
