7
water (e.g. a filled wash basin,
bathtub or shower).
• Keep the appliance out of the
reach of children.
• Before use, check whether your
voltage corresponds to the volt-
age printed on the transformer.
Always use the 12 V transformer,
type PI-41-77 AR.
Description
Ö
Soothing attachment
(not with EE 1020 model)
Ü
Epilator head with
tweezer element
á
Release bar for epilator head
à
Switch
â
Socket
ä
Cord connector
ã
12 V transformer with plug
for power socket
Underarm epilation
Use tests monitored by dermato-
logists have shown that the epilator
head may as well be used underarm.
Be aware that this area is particularly
sensitive to pain. However, the pain
sensation will diminish with
repeated usage. For this specific
application, we would like to give
the following advice:
• Before epilating, thoroughly clean
under your arm to remove any
deodorant residue. Carefully
dry under your arms with a towel
using a dabbing action to avoid
skin irritations.
• Hair should not be longer than
5 mm.
• After use, apply Silk·épil cream or
baby powder (don’t use alcoholic
deodorants).
How to operate your Silk·épil
Before starting off, make sure that
the epilator head is thoroughly
cleaned and disinfected. Your skin
must be dry and free from grease
or cream.
• Plug the cord connector into the
socket and plug the transformer
into an electrical outlet.
1
Switching on
0 = Off
1 = For gentle epilation
2 = For high-speed epilation
2
Rub your skin to lift short hairs.
Apply the Silk·épil at right angles
(90°) against your skin. For best
epilation results, make sure that
the soothing attachment wheels
always
keep in contact with the
skin surface. Pressing gently,
guide it
slowly against the
direction of hair
growth. Do not
press too hard. On bony parts,
we recommend to use a lower
switch setting.
3
When epilating behind the knee,
keep the leg
stretched out
straight
; when epilating under-
arm, your arm should be raised up.
5303274_EE1055_LA Seite 7 Mittwoch, 10. Mai 2000 11:00 11
