7
Description
1a High-Frequency Massage System
1b Efficiency cap
2 Epilation
head
3 «smartlight»
4
Switch with lock keys (4a)
5a Charging light
5b Low charge light
6 Release
button
7
Special cord set
8
Sensible area cap
9 Precision
cap
10 Shaver head attachment
Charging
• Before use, charge the appliance. For best
performance, we recommend that you always use
a fully charged appliance. Using the special cord
set, connect the appliance to an electrical outlet
with the motor switched off. Charging time is
approximately 1 hour.
• The green charging light (5a) flashes to show that
the epilator is being charged. When the battery is
fully charged, the charging light shines permanently.
Once fully charged, use the appliance without
cord.
• When the red low-charge light (5b) flashes, recon-
nect the appliance to an electrical outlet via the
special cord set to recharge.
• A full charge provides up to 40 minutes of cord-
less operation time.
• Wet usage might reduce the operation time. We
recommend that you recharge the appliance after
each use.
• The best temperature range for charging, using
and storing the appliance is between 15 °C and
35 °C. In case the temperature is far beyond this
range, the charging time might be longer whereas
the cordless operation time might be reduced.
Getting prepared for …
… dry usage
Your skin must be dry and free from grease or cream.
… wet usage
The appliance can be used on wet skin, even under
running water. Make sure that the skin is very moist
in order to achieve optimum gliding conditions for
the appliance.
• After each wet usage, clean the appliance under
running water.
• Before use, always make sure that epilation head
(2) is clean and provided with a cap.
• To change caps, press their lateral ribs and pull off.
• To change heads, press the release button (6).
A How to epilate
The epilation head (2) features the new Close-Grip
Technology to ensure extra efficiency especially with
short hairs:
The 40 tweezers always keep close contact to the
skin to remove hairs as short as grain of sand.
Thanks to its pivoting feature, it perfectly adapts to
the body contours, for maximum thoroughness.
The High-Frequency Massage System (1a) soothes
your skin effectively for an ultra gentle epilation.
The Efficiency cap (1b) for fast epilation ensures
maximum skin contact, positioning the tweezers at
the optimum position at all times.
1
Turning on
• Press one of the lock keys (4a) and turn the
switch (4) clockwise to select your preferred
speed setting:
«I» = extra gentle
«II» = extra efficient
• The «smartlight» (3) comes on instantly and
shines as long as the appliance is switched on.
It reproduces an almost daylight condition, thus
revealing even the finest hair and giving you a
better control for improved epilation efficiency.
2
How to guide the appliance
• Always stretch your skin when epilating.
• Always make sure that the epilation area
between the massaging rollers is in contact
with your skin.
• The pivoting caps automatically adapt to the
contour of your skin.
• Guide the appliance in a slow, continuous
movement without pressure against the hair
growth, in the direction of the switch. As hair
can grow in different directions, it may also be
helpful to guide the appliance in different direc-
tions to achieve optimum results. The pulsating
movement of the massaging rollers stimulate
and relax the skin for a gentler epilation.
• If you are used to the sensation of epilation and
prefer a faster way of removing hair, attach the
Efficiency cap (1b) replacing the Massage
System (1a).
3
Leg epilation
Epilate your legs from the lower leg in an upward
direction. When epilating behind the knee, keep
the leg stretched out straight.
4
Underarm and bikini line epilation
For this specific application, the sensible area cap
(8) has been developed as an optional attachment
to be placed on the epilation head (2).
96701588_SE7569_CEEMEA_S6-44.indd 7
96701588_SE7569_CEEMEA_S6-44.indd 7
07.11.13 10:26
07.11.13 10:26
