19
SmartGuide display unit
Displayed
Icon
Meaning
«Daily Clean»
mode
«Sensitive»
mode
«Massage»
mode
«Whitening»
mode
«Deep Clean»
mode
Too much pressure is applied.
Reduce the brushing force.
«Quadrant circle» – currently you
are brushing in the first 30-second
interval (45-second interval within
Deep Clean mode). Move to the
next quadrant of your mouth,
when the second segment starts
flashing.
Dentist recommended 2-minute
brushing time (3-minute brushing
time within the Deep Clean mode)
has been reached.
The rechargeable battery of the
handle is low. Charge the tooth-
brush handle.
Batteries of the SmartGuide
display unit are low. Change
batteries of the SmartGuide
display unit.
Wall mount
If you prefer to mount the SmartGuide display
unit on a wall, mirror or other surface, use
the adhesive tape (l) to fix the wall mount.
Before doing so, make sure the chosen surface
is clean and dry (remove grease and dust first).
Position the wall mount so that the Oral-B logo
is readable. Then, press the wall mount evenly
and firmly to the wall. Wait 24 hours before
sliding the SmartGuide display unit into the fixed
wall mount.
Please note: The adhesive tape will not work on
dirt-repellent surfaces.
Cleaning recommendations
• After brushing, rinse your brush head
thoroughly under running water.
• Remove the brush head from the handle and
clean both parts separately under running
water. Then, wipe them dry before you put the
handle on the charging unit.
• Before cleaning your charging unit, make sure
you disassemble it first. The charging ring
and SmartPlug should never be placed in the
dishwasher. However, all other parts (base
plate and protective cover) are dishwasher-
safe.
• From time to time, you can also clean the
charging ring, SmartPlug and SmartGuide
display unit with a damp cloth. Both the
SmartPlug charger and SmartGuide display
unit should never be placed in water.
98771708_D32_Japan.indd 19
98771708_D32_Japan.indd 19
01.04.2009 8:39:35 Uhr
01.04.2009 8:39:35 Uhr
