20
Synchronizing
In order to avoid interference of display
messages when using more than one Oral-B
DENTA-PRIDE toothbrush with separate
SmartGuide display units in the same
household, you need to assign the handles to
their respective display units. Please follow the
steps below:
• Push the «h/min» button in the battery compart-
ment for at least 3 seconds. The SmartGuide
display unit shows «L---», indicating the
«Learn» mode for synchronization is activated.
• Now you are requested by a flashing
on/off button in the toothbrush icon on the
SmartGuide display unit to turn the handle on.
When doing so, the automatic synchronization
process starts. It is finished when «L-1-» is
displayed.
• Then turn off the handle.
If you would like to assign a second handle to
the same SmartGuide display unit, repeat the
last two steps described above with the other
handle. You can exit the «Learn» mode by
pressing the «h/min» or «set» button. Otherwise
the «Learn» mode will automatically end after
30 seconds.
Please note:
• A maximum of 2 handles can be synchronized
with one SmartGuide display unit. After you
synchronized the second handle, «Full» will be
displayed.
• When changing batteries of the SmartGuide
display unit, stored data will be erased.
Therefore, please repeat the synchronization
process every time you change the batteries.
Deactivating the radio
transmission
If you want to use or carry your toothbrush in
surroundings where radio controlled appliances
are not allowed (e.g. hospitals or aircraft),
deactivate the radio transmission first.
To do so, simultaneously press the on/off and
mode button for 3 seconds. The handle display
shows the radio deactivation icon. If you want
to reactivate the radio transmission, press both
buttons again for 3 seconds and the display
icon disappears.
Removing batteries
Handle
At the end of the product’s useful life, open the
handle as shown, remove the rechargeable
battery and dispose of it according to local
environmental regulations.
Caution! Opening the handle will destroy the
appliance and invalidate the warranty.
s
et
h/min
3
s
ec.
s
et
h/min
3
s
ec.
3
s
ec.
3
s
ec.
5
1
2
3
6
7
4
Ni-MH
5
1
2
3
6
7
4
Ni-MH
98771708_D32_Japan.indd 20
98771708_D32_Japan.indd 20
01.04.2009 8:39:36 Uhr
01.04.2009 8:39:36 Uhr
