Page 48
Maintenance and Lubrication Schedule
750
Cycles
Inspect inner roll stop and linkage for:
• Proper operation.
• Positive securement
• Wear or damage
• Proper adjustment
Check carriage ride height in housing
Check stow height/lifting arm alignment
Inspect wiring harnesses for securement,
wear or other damage
Check lower pan securement
Torque tube pivot bearings (4 places)
Verify NHTSA Operations Checklist
Resecure, replace or correct as needed. See Floor
Level and Inner Roll Stop Adjustment Instructions in
Service Manual.
Adjust as needed. See Carriage Ride Height Adjust-
ment in Service Manual.
Lifting arms should be horizontal, aligned with each
other and aligned with carriage. Adjust as needed.
See Switch Adjustment (Stow Switch) in Service
Manual.
Resecure, replace or correct as needed
Resecure, replace damaged parts or correct as
needed.
Apply Light Oil - See Lubrication Diagram
See NHTSA Operations Checklist
