background image

Page 12

Lift Operation Safety

Lift attendants must ensure that lift occupants keep hands, 
arms and all other body parts within the lift occupant area 
and clear of moving parts.

Platform must be positioned at 

fl

oor level (bridging position) 

when loading or unloading in and out of vehicle.

Do not use platform inner roll stop or outer barriers as a 
brake.  Stop and brake wheelchair when loading onto the 
platform (manually stop and brake manual wheelchairs 
— stop powered wheelchairs with the wheelchair controls).

Turn powered (electric) wheelchairs off when on lift platform.

Press the DOWN switch until the entire platform rests on 
ground level (lowered fully) and the outer barriers are fully 
unfolded (ramp position) before loading or unloading a pas-
senger at ground level. 

WARNING

Lift Operation Safety Precautions

 (continued)

WARNING

If the lift operating 
instructions, manual 
operating instructions 
and/or lift operation 
safety precautions are 
not fully understood, 
contact The Braun 
Corporation immedi-
ately.  Failure to do so 
may result in serious 
bodily injury and/or 
property damage.

WARNING

WARNING

WARNING

WARNING

WARNING

Both outer barriers must be fully unfolded (ramp position) until front and rear wheelchair 
wheels cross the barriers when loading or unloading at ground level.

Summary of Contents for NUVL855RM24

































































Reviews: