Page 22
Pump Module
Parts List
*
Apply red #271 Thread Locker Loctite
®
to the four hex bolts (items 27 and 28) if a blue nylon patch is not present on
the bolts when retro
fi
tting an M268-0113 pump assembly. Loctite
®
is available from The Braun Corporation under part
number 11522-1.
t
Indicates items available for replacement part purposes
only
. These items
are not
included with replacement pump
modules.
Item Qty.
Description
1
Pump Module (complete), 12 Volt, Rear
917-5516RNA
917-5516FNA
1
1
Plate, Backing / Mounting - Rear
985-2501RN
985-2501FN
2
1
Cover, Pump, 2-Piece - Back / Bottom
(915-0513RNAPT or 915-0513FNAPT Includes Items 2 and 16 - 22)
915-0513RNPT 915-0513FNPT
3
1
Cover, Pump - 2-Piece - Top / Front
(915-0519RNAPT or 915-0519FNAPT Includes Items 3 and 39 - 52)
915-0519RNPT
915-0519FNPT
Part Numbers of Items Identical on all Lift Models
Item Qty.
Description
Part
No.
4
1
Pump Assembly (M268-0113) 12V-120G - Dual Relief / ARS (Includes Items 5 & 6)
31038-12V
5
1
Power Cable, Up Solenoid to Motor
29049
6
1
Solenoid, Up - 4-Post - Trombetta (Flat Mount)
31374
7
1
Diode Assembly, Up Solenoid
73906A
8
2
Nut, #10-32, Serrated Flange
83080
9
2
Fitting, Male 7/16-20 O-Ring to Male 7/16-20 JIC 37°
24504
10
1
Elbow, Female Swivel 7/16-20 JIC 37° to (2) Male 7/16-20 JIC 37°
26579
11
1
Switch,
Pressure
31199
12
1
Control, Hand Pendant Assembly (See below for available options)
12a
-
Control, Hand Pendant Assembly - Non-Shielded Cable - Straight
t
See note below
32832A
12b
-
Control, Hand Pendant Assembly - Shielded Cable - Straight
t
See note below
32833A
12c
-
Control, Hand Pendant Assembly - Shielded Cable - Coiled
t
See note below
32421A
13
1
Control
Board
Assembly
100159-001
14
8
Standoff,
Snap-In
31011
15
1
Switch, Push Button
31753
16
1
Recepticle, Clip On
28803
17
1
Lens, Threshold Warning - Red
30704
18
1
Decal, Warning / Pressure Relief Valve (Not shown)
22249
19
1
Spacer, Lens - NHTSA
31386
20
1
Metal Ring Base - Lamp
30971
21
1
Socket,
Lamp
30703
22
3
Screw, #8-32 x 1/2” Pan Head Phillips - Thread Cut
30974
23
1
Bulb, Light
19841
24
1
Diode, Green LED, Panel Mount
29545
25
4
Rivet, Snap - .124” Hole x .197”/.236” Thick
29874
26
2
Washer, 5/16” Flat
10063
27
2
Bolt, 5/16-18 x 3/4”, Nylock, Hex * See note below
29608
28
2
Bolt, 5/16-18 x 1/2”, Nylock, Hex * See note below
10012
29
1
Cable, Ground
22166A
30
1
Washer, 5/16” External Tooth
16368
31
1
Beeper,
Continuous
30487
32
1
Switch,
Toggle
31787
33
1
Decal, Lift Power - On/Off (Not shown)
21494
34
1
Stud, Power Feed
26084
35
1
Rubber Boot, Red
t
See note below
82046
36
1
Harness, Lift Interlock Connection
32639A
37
1
Wire Assembly, Lift Stowed Connection
t
See note below
32638A
38
1
Pump Handle with Grip
17206A
39
3
Rivet, Pop, SD43BS - 1/8” - .13”/.19”
12954
40
1
Plug, Window - Clear
30443
41
1
Stud, Wing Head - 1/4 Turn
28804
42
1
Retainer, Push On
28805
43
1
Washer, Nylon, 1/4” I.D. x 11/16” O.D. x .030”
12690
44
1
Clip, Pump Handle - Top
915-5517
45
1
Clip, Pump Handle - Bottom
915-5518
46
1
Decal, Manual Instructions - Public
(Not shown )
31412
47
1
Decal, Removal / Installaton - Pump Cover
(Not shown)
29051
48
1
Decal, Warning - Control Board Damage - ESD
(Not shown)
30787
49
1
Decal, Removal / Installation Pump Handle (Not shown)
29052
50
1
Decal, Installation & Warning - Hydraulic Pressure Switch (Not shown)
27154
51
1
Decal, Dual Relief Adjustment (Not shown)
32201
52
1
Decal, LCD Lift Codes (Not shown)
32410
53
1
Cable, Pump Module Power Hookup (Not shown)
26082A-4
54
1
Harness, Power - Stow Interlock (Not shown - see Wiring Diagram)
915-4530RNA
55
1
Harness, Interlock / Lighting (Not shown - see Wiring Diagram)
915-4533NA
56
1
Harness, Up / Down Solenoid (Not shown - see Wiring Diagram)
915-2533NA
57
1
Harness, Threshold Switch Extension (Not shown - see Wiring Diagram)
915-4534NA
58
1
Harness, Hand Control - Pump Housing to Circuit Board (Not shown - see Wiring Diagram)
100245-001
Part Numbers of Items Dedicated per Lift Model
NL915IB, NL916IB,
NL917IB, NL918IB
and NL919IB
NL915FIB, NL916FIB,
NL917FIB, NL918FIB
and NL919FIB
